What device adapters were available for the Tektronix curve tracer models 370A, 370B, 371 and 371A?

Вопрос :

Ответ :

The adapaters that were available for the curve tracers are listed below:

Model	Usage	Pins	Max Volts (socket)
A1001	Blank Adapter	6	N/A
A1002	TO-220 Transistors (with in-line leads)	6	1KV
A1003	T0-3/TO-66 Power Transistors	6	2KV
A1004	Offset Lead Power Transistors	6	1.5KV
A1005	Axial Lead Diodes	4	2KV
A1006	Dual Long Lead Transistors	5	1KV
A1007	Dual Transistor	5	500V
A1008	Dual Long Lead Transistors	5	1KV
A1009	Dual FET	5	500V
A1010	DIP IC (16 Pin Max)	5	500V
A1023	SOT23 Surface Mount Transistors	3	1KV
A1024	TO-252 (D-PAK)	5	1KV

The 5-pin Dual adapters (A1006, A1007, A1008, and A1009) were equipped with jumpers that allowed the emitter pin(s) of the right hand (or bottom) socket(s) to be connected to the adapter's emitter terminal.

Another use of the jumper was to short the base and collector terminals of either socket for applications such as gathering data for the Gummel-Poon model which deals with ib vs vbe with vbc = 0. The jumper shorted the base to the collector to achieve vbc = 0

-----------------------------------------------------------------

The 370A/B was shipped standard with the A1001, A1002, A1005, and A1007.

The 371A was shipped standard with the A1002 and A1003.

Эти часто задаваемые вопросы относятся к

Серия приборов не найдена

Прибор:

Идентификатор часто задаваемых вопросов 62871

Просмотреть все ЧЗВ »