Remote Operation: What Front Panel Settings are Required to use the VXIPnP drivers for SourceMeter?

Вопрос :

Ответ :

What Front Panel Settings are Required to use the VXI PnP drivers for the SourceMeter Instruments?

Selection and configuration of GPIB or RS-232 communication is important. Both are supported by the VXI PnP driver, however, the instrument must be configured from the front panel first.

Use the front panel buttons and select:

Menu
Communication
GPIB or RS-232

Instrument Settings

For GPIB:

For RS-232:

select the address (default is 24)

select SCPI protocol (not 488.1)

BAUD: 9600

BITS: 8

Parity: NONE

Terminator: LF

Flow-CTRL: XON-XOFF

Typical Resource Names

instrument at address 24	instrument on COM1
GPIB0::24::INSTR	ASRL1::INSTR

Эти часто задаваемые вопросы относятся к

Серия приборов: Графические источники-измерители (SMU) серии 2400

Прибор:

Идентификатор часто задаваемых вопросов 69611

Просмотреть все ЧЗВ »