Is it possible to use the 80E01 and 80E06 electrical sampling modules with the 80A03?

Is it possible to use the 80E01 and 80E06 electrical sampling modules with the 80A03?

Yes, however there are limitations. Some of them are:

The SMA adaptor (2.41/1.85mm t 2.92mm) will need to be used.

With the SMA adaptors on the input connector, the provided semi-rigid cable will not fit. A custom cable (not available from Tektronix) is required. Use a short high-quality SMA cable or fabricate your own semi-rigid cable.

The bandwidth of the 80A03 is limited to 12Ghz, nominal