Тестирование Ethernet

Tektronix предлагает обширный набор интегрированных средств для проверки физического уровня устройств IEEE 802.3 Ethernet, а также разработки и отладки систем на базе Ethernet от 10BASE-T до 40/100GB.

Tektronix предлагает также передовые приборы для проверки на соответствие стандартам и отладки по другим стандартам передачи данных, например 10BASE-T, 10BASE-Te, 100BASE-Tx, 1000BASE-T, BroadR-Reach, 10GBASE-T, 10GBASE-KR, SFP+ (SFF 8431), QSFP+ (SFF-8634), Fiber Channel FC-16G (FC-PI-5) и CEI-28G-VSR.

Позвоните нам 1-800-833-9200 or try Live Chat
Чтобы начать конфигурацию вашего решения,
Добавить к выбору

Конфигурация печати

Конфигурация эл. почты

Запросить цену

Enter email:


Please enter a valid email address.

Your email has been sent.

Your quote has been requested.

  • Сбросить


Understanding and Characterizing Timing Jitter Primer

Timing jitter is the unwelcome companion of all electrical systems that use voltage transitions to represent timing information. This paper focuses primarily on jitter in electrical systems.

Physical Layer Compliance Testing for 100BASE-TX

This application note describes various physical layer tests including amplitude domain, return loss, jitter and duty cycle-distortion and compliance testing using TDSET3 software.

The Basics of Serial Data Compliance and Validation Measurements

This primer is designed to help you understand the common aspects of serial data transmission & to explain the analog and digital measurement requirements that apply to these emerging serial technologies

Troubleshooting Ethernet Problems with your Oscilloscope

Learn the basics of the 10BASE-T and 100BASE-TX Ethernet physical layers to help you troubleshoot bus problems or related system issues.  Learn how to set up and interpret the results when using automated decoding, triggering, and search on an oscilloscope equipped with Ethernet analysis capability.

DesignCon 2015 Paper – Hybrid Modeled Measured Characterization of a 320 Gbit/s Backplane SystemThis paper explores a case study of a multilane Ethernet backplane 320 Gbit/s system that is difficult to fully measure and deembed, implements a hybrid method of modeling, deembedding, and measurement, explores improvements to the metrology and independent verification of results, and discusses the methodology both at 28Gb/s and 10Gb/s.
Debugging Serial Buses in Embedded System Designs

Find out how the protocol trigger, decode and search capabilities of the popular MSO and DPO Series oscilloscopes solve serial bus integration and debug challenges of many buses such as I2C, SPI , USB, RS-232/422/485/UART, CAN, LIN, FlexRay, Ethernet, and I2S/LJ/RJ/TDM.

Time Domain Methods for Measuring Crosstalk for PCB Quality Verification Application NoteLearn about the elements of crosstalk and how you can measure it on a single-layer PCB using a sampling scope.
Teranetics Turns to Tektronix to Validate First Dual-Port 10GBASE-T PHY Case StudyTeranetics Case Study -- Testing for 10GBASE-T Standard
Physical Layer Compliance Testing for 10GBASE-T

This application note describes tools that deliver proper and optimal electronic testing for the validation of your 10GBASE-T designs.

Variations in 10 Gigabit Ethernet Laser Transmitter Testing Using Reference Receivers One of the key tools used by telecom/datacom original equipment manufacturers, system installers and system servicers to view eye patterns on an oscilloscope and test the quality of a laser’s time-domain signal is the reference receiver (RR).

The accelerated development of 400G Ethernet technology is driving new…


TDSET3 Automated Ethernet Analysis Video: Physical Layer Compliance Testing


This demo shows Tektronix solutions for short reach applications and data centers…


SFF-8431 – SFP+ QSFP+ Measurements & Setup Library Methods Of Implementation (MOI) for Verification, Debug, Characterization, Conformance Test

1000BASE-T Method of Implementation
100BASE-TX Method of Implementation (MOI)
10BASE-T Method Of Implementation (MOI)

Загрузить руководства, технические описания, программное обеспечение и т. д.:

Go to top