Вопрос :
Slowest speed limitation in "internal clock?"
Ответ :
Currently, when the timebase is run at a very slow speed (multiple TDR pulses visible) in "Internal Clock" trigger setting the instrument can on rare occasions display misplaced points after the 1st square edge. This is a known problem. The impact should be minimal as this mode of operation is not useful for any particular measurement.
Эти часто задаваемые вопросы относятся к
Серия приборов не найдена
Прибор:
Идентификатор часто задаваемых вопросов 62106
Просмотреть все ЧЗВ »