On my AWG I can not find my offset or filter controls. Why?

There are two possibilities:
First, these features are not available when option 02 is installed.

Second, "Direct" mode is selected; this mode bypasses these items.

To check:

For AWG400/500/600/700 press Vertical Menu and check the setting of Output. If it is Direct change to Normal and these controls will return.

Эти часто задаваемые вопросы относятся к

Серия приборов не найдена

Прибор:

Идентификатор часто задаваемых вопросов 55971