Свяжитесь с нами

Живой чат с представителями Tektronix. С 9:00 до 17:00, тихоокеанское поясное время.

Звонок

Позвоните нам

Живой чат с представителями Tektronix. С 9:00 до 17:00 CET

Загрузить

Загрузить руководства, технические описания, программное обеспечение и т. д.:

ТИП ЗАГРУЗКИ
МОДЕЛЬ ИЛИ КЛЮЧЕВОЕ СЛОВО

Обратная связь

How does the PC noise affect the measurement on my plug-in data acquisition board?

Вопрос :

How does the PC noise affect the measurement on my plug-in data acquisition board?

Ответ :

Noise is always an important issue to deal with, whether the measurement hardware is a standalone instrument or a plug-in data acquisition board. The noise generated by the PC is not unique to the PC itself. Most components in the PC do exist in a standalone instrument as well, such as clocks, multiplexers, switching power supplies, and various digital circuits. It is the task of the analog designer to predict the sources of noise and minimize their effects, like adding low pass filters or isolating the digital circuit from the analog circuit or conditioning the power coming into the board or even shielding. RF noise is everywhere and it could affect the measurement device inside or outside the PC. The noise in the measurement associated with PC boards is less a result of PC noise and more a result of the fact that traditional standalone instruments use integrating A/D technology, while plug-in data acquisition boards use successive approximation A/Ds that are more susceptible to noise.

Эти часто задаваемые вопросы относятся к

Серия приборов не найдена

Прибор:

Идентификатор часто задаваемых вопросов 70586

Просмотреть все ЧЗВ »