Загрузить
Загрузить

Загрузить руководства, технические описания, программное обеспечение и т. д.:

ТИП ЗАГРУЗКИ
МОДЕЛЬ ИЛИ КЛЮЧЕВОЕ СЛОВО

How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?

Вопрос :

How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?

Ответ :

  1. Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.
  2. Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.
  3. Click the Properties button below the Update status bar.

OCIMimage1_0

 

  1. Enter the VISA Alias in the Device Name window, and then click OK.

OCIMproperties20device20name

 

The device name you created will appear when you update TekVISA OpenChoice Instrument Manager Instruments list by clicking on Instrument List Update button.

OCIMinstrdevicename

 

You will now see the device name you created to describe the oscilloscope connection when you use TekVISA to connect to programs such as TekXL Toolbar, TekW Toolbar, MATLAB, LabVIEW and others.


Эти часто задаваемые вопросы относятся к

Серия приборов: DPO7000 MSO/DPO70000 MSO2000B / DPO2000B MSO3000/DPO3000 MSO4000/DPO4000 MSO5000 / DPO5000 TDS2000C TDS3000 tds5000 MDO3000 MDO4000

Прибор:

Идентификатор часто задаваемых вопросов 66181

Просмотреть все ЧЗВ »