Свяжитесь с нами

Живой чат с представителями Tektronix. С 9:00 до 17:00, тихоокеанское поясное время.


Позвоните нам

Живой чат с представителями Tektronix. С 9:00 до 17:00 CET


Загрузить руководства, технические описания, программное обеспечение и т. д.:


PSPL5334 1:4 Resistive Divider

PSPL5334 1:4 Resistive Divider

The products on this datasheet are no longer being sold by Tektronix.
View Tektronix Encore for reconditioned test equipment.
Check support and warranty status for these products.

Дополнительные сведения

Читать на веб-сайте:

The PSPL5334 Resistive Divider is an Ultra-Broadband Resistive Coupler that provides even division of an input signal between four output ports. The device exhibits excellent through-line insertion loss stability for frequencies from DC to >25 GHz. The PSPL5334 features good impedance match across a wide range of frequencies, with Return Loss typically >15 dB from 0-25 GHz. Resistors are accurate within ±2%, providing excellent input matching.

Key performance specifications
  • DC to >25 GHz
  • Excellent Return Loss
  • Superb Insertion Loss Stability
  • Accurate Amplitude and Phase Tracking

Typical performance



Parameter 1 Value
Bandwidth (-3 dB) >25 GHz, guaranteed
Insertion Loss 12 dB, nominal DC
12.5 ±1.25 dB, 0-25 GHz, guaranteed
Rise time (10% - 90%) ≤15 ps
Return Loss >15 dB, 0-18 GHz, guaranteed
≥10 dB, 18-25 GHz, guaranteed
Impedance @ DC (ports 1 through 5) 50 ±1 Ω, guaranteed
Insertion Loss Asymmetry (S31-S21) ≤0.7 dB, 0-25 GHz, guaranteed
Phase Tracking (S51 through S21) ≤10 deg, 0-25 GHz, guaranteed
Group Delay 245 ps, 0-25 GHz, typical
Temperature Range 0-90 °C @ 1.5 W, Operating Case Temperature
Linearly derated to 0 W @ 110 °C
Max Input Power (Avg) 1.5 Watts, CW
Connectors SMA jacks (f)
Warranty One Year

1 All parameters listed are typical unless max/min guaranteed limits are provided. Measurements made with 50 Ω matched line/load at output ports.

Mechanical dimensions

Ordering information

Quad Divider, 12 dB