Свяжитесь с нами

ЕСТЬ ВОПРОСЫ

Живой чат с представителями Tektronix. С 6:00 до 16:30, тихоокеанское поясное время.

Звонок

Позвоните нам 1-800-438-8165

Живой чат с представителями Tektronix. С 9:00 до 5:30 CET

Загрузить

Загрузить руководства, технические описания, программное обеспечение и т. д.:

ТИП ЗАГРУЗКИ
МОДЕЛЬ ИЛИ КЛЮЧЕВОЕ СЛОВО

Обратная связь

Certificate Options

 
Z540.1
Z540.1 w/ Data
Accredited 17025 with Uncertainties
17025 Compliant 
Z540.3
ANSI/NCSL Z540.1 Compliant X X X X X
ISO 9001:2015 Compliant   X X X X X
ISO/IEC 17025 Accredited Calibration       X   X
ISO/IEC 17025 Compliant      X X X
Traceable Calibration to National Standards  X X X X X
Out-of-Tolerance (OOT) Notification   X X X X X
As Found/As Left Test Data   OOT1 X X X X
Notes: 
1: For those parameters found OOT

 

 

Get Started Today

Get a free quote for calibration or call 1-800-438-8165
to speak directly with a customer service representative

Get a Quote

 
Calibration Service Levels

Standard Calibration (ANSI/NCSL Z540.1)

This service provides a calibration certificate with a calibration date and calibration due date. A traceability statement is provided. Measurement parameters not meeting the test specifications (out of tolerance) are identified and reported on the certificate.

Standard Calibration with Data (Before/After Data)

This service provides a calibration certificate with a calibration date and calibration due date. A traceability statement is provided. Complete before/after measurement data is provided, listing the test name, measured value and test limits for each parameter tested during the calibration process. 
Calibration Service Levels
Calibration Service Levels

17025 Accredited Calibration

Instrumentation is calibrated in accordance with ISO/IEC 17025 within our approved scope of accreditation. Accredited calibrations provide a certificate of calibration with the accrediting body's logo on the document. The calibration date is on the certificate and the calibration due date is only placed on the document when specified by the customer or contractually agreed. A traceability statement is provided. Measurement data and uncertainty for each parameter tested during the calibration is provided.

ANSI/NCSL Z540.3 Calibration

Instrumentation is calibrated in accordance with ANSI/NCSL Z540.3 within our approved ISO/IEC 17025 scope of accreditation. Calibrations provide a certificate of calibration with the accrediting body's logo on the document. The calibration date and the calibration due date (if provided or known) is on the certificate. A traceability statement is provided. Measurement data and uncertainty for each parameter tested during the calibration is provided.
Calibration Service Levels