Оптические и электрические приемопередатчики со скоростями до 100 ГБ/с

Компания Tektronix обеспечивает всестороннюю поддержку тестирования приёма и передачи сигналов для стандартов 100G, а также предоставляет консультационные услуги по тестированию передачи сигналов с кодированием NRZ и PAM4 и в форматах комплексной когерентной модуляции. Благодаря испытательному оборудованию Tektronix ваша команда будет готова к работе с новыми технологиями передачи данных.

  • Осциллографы реального времени серии DPO70000SX обеспечивают возможность эффективной проверки ваших технологических достижений и быстрой отладки и подтверждения стандартов электротехники 100G. Уточните характеристики своих устройств стандарта 100G благодаря самому низкому в отрасли минимальному уровню шума и высокой частоте дискретизации.
  • Стробоскопические осциллографы серии DSA8300 предназначены для точного определения характеристик оптических передатчиков по основным одномодовым оптическим стандартам при помощи лучших в отрасли встроенных эталонных оптических приемников с очень низким OSNR.
  • Приборы для восстановления тактовой частоты CR286A поддерживают большинство стандартов 100 Гбит/с и совместно работают со стробоскопическими осциллографами Tektronix и анализаторами коэффициентов битовых ошибок, чтобы обеспечить источник стабильной частоты для точного измерения временных характеристик.
  • Измерители коэффициента битовых ошибок BERTScope серии BSA обеспечивают генерацию длинных цифровых последовательностей PRBS (псевдослучайных двоичных последовательностей), точное измерение коэффициента битовых ошибок и глубокий анализ истинных причин проблем.


Избранные материалы


100G/400G Datacom Transmitter Measurements: Determining Proper Measurement Tools for 100G/400G Datacom Testing

This application note walks through a number of common misconceptions and key considerations to help you select the proper scope technology (RTO vs. ETO) for your needs.

Extinction Ratio (ER) Calibrated White Paper

This white paper explains some of the benefits of highly accurate ER measurements in both 10 GbE (Ethernet), with its relatively low ER requirement, and in SONET/SDH, and the methodology that supports consistent, accurate ER result.

Physical Layer Tests of 100 Gb/s Communications Systems

Learn how to prepare for compliance measurements on 100G standards.

Bridging the Gap Between BER and Eye Diagrams — A BER Contour Tutorial

Introduction to the BER Contour measurement.

Clock Recovery Primer, Part 1

Look at clock recovery from a practical point of view, Part 1.

32 Gbit/s QPSK Transmission at 385 GHzLearn more about a world record breaking wireless system capable of transmitting data at 400 GHz (0.4 THz) using advanced signal coding (up to QAM-16) and key advanced THz devices in this whitepaper.
Semtech Turns to Tektronix DSA8300 Sampling Scope to Characterize New 25-28 Gb/s CDR DevicesThis customer case study illustrates the benefits that Tektronix DataCom test solutions deliver to characterize electrical performance of 100G technologies with the industry’s lowest intrinsic noise floor.
Practices for Measurements on 25 Gb/s Signaling

Review of the measurement practices for the characterization and compliance test of the transmitter and receiver for 25+ Gb/s signaling in 100 G systems with oscilloscopes.

Coherent Optical Signal Generation with High-Performance AWG

Learn how instrument characteristics and performance level of the AWG70000 influence the ability to generate different modulation schemes and the way the instrument’s flexibility can be used to compensate for internal and external device imperfections and to emulate component and link distortions.

Ultralow drive voltage silicon traveling-wave modulator Paper (Optical Society of America)

In this paper from the Optical Society of America, the DSA8300 Series Oscilloscope is being used to verify operation of a broadband modulator with a drive voltage of 0.63 Vpp at 20 Gb/s.

This video highlights the benefits of using the DPO70000SX real time oscilloscope…


Watch our highlights overview of OFC 2017! 


See a demonstration test system for the next generation of optical signaling,…


Watch this video to get an overview of the new Link Training Tool, which forms…


The accelerated development of 400G Ethernet technology is driving new…


In this video we look at a topic that is becoming increasingly important in the…


At this booth, we're demonstrating our DS8300 Digital Sampling Oscilloscope…


At this ECOC 2016 Demo Station, we're looking at generating a 50+ Gigabaud…


Find out how new PAM4 software updates including full noise decomposition enable…


Tackle today's high-speed serial signals and tomorrow's too with the scalable…

PAM4 Electrical Webinar

This presentation will review PAM4 measurement methodologies and expand on emerging needs related to FFE reference equalization, clock recovery challenges, BER measurement needs as well as SNDR as it relates to multi-level signaling. 

Maximizing Margins for 4th Gen High Speed Serial Standards

As data rates increase, the effect of cables and fixtures become a larger part of the overall measurement result. Gain insight into the issues and how to solve them for each step of the signal path from the device under test to the oscilloscope.

Electrical Validation of the Type-C Interface

The introduction of the Type-C interface, and its implementation across multiple high-demand serial standards, has created new challenges for developers. This webinar explores the latest updates to the Type-C specification, as they pertain to USB3.1, DisplayPort, and Thunderbolt standards, including Power Delivery.

Practical 400G PAM4 Test Methods - Optical and Electrical Measurement

The accelerated development of 400G Ethernet technology is driving new requirements through the test community as it relates to measuring PAM4 signals for optical and electrical systems. This presentation will review both of these two very different technology fronts and discuss practical elements of physical layer PAM4 testing ranging from 50mm based CEI-XSR specs to 10Km 400GBASE-LR8.

NBASE-T and IEEE802.3bz Technology and Measurements

The rapid growth of ever-more powerful mobile devices, and the adoption of new wireless technologies such as 802.11ac, has enterprise networks struggling to keep pace. An overview of NBASE-T and the emerging IEEE802.3bz standard, as well as key measurement challenges, will be presented in this webinar.

New Technologies for Probing Low Power Circuits Webinar

As designs for mobile devices and computers use lower power circuits in their design, validation testing and debug become more challenging.

Characterizing Coherent Optical Systems Webinar

Learn about the coherent modulation being considered for 400G networks, the key building blocks of a coherent test system, how to optimize measurement accuracy and the benefits of customizable analysis for non-standard testing.


Загрузить руководства, технические описания, программное обеспечение и т. д.:

Go to top